EVOLUTION COVER page-15
PART IMAGE FUNCTION
Foot bracket
The foot bracket provides a solid footing of the cover and
is attached to the bottom of the jack.
Spa entrance U-frame
link
This link is installed under the entrance steps of the spa.
It links the two non-motor-side posts.
Key switch The key switch is used to operate the cover.
Foam spacer
The foam spacer is used for the installation process to
protect the spa from direct contact with the cover.
Limit switch
The limit switches are located on the operator. Refer to
the LIMIT SWITCH ADJUSTMENT section for further
details.
Motor frame
The motor frame is composed of two motor-side jacks
and the operator.
240799 OWNER'S MANUAL REVISION 4
To Next Page
Loading...