Operation
120 / 135
7.3 Anti-islanding safety function
The PCS is equipped with an anti-islanding safety function. The PCS continuously
monitors the AC power grid to ensure it meets the conditions for Power generation
and checks whether the Battery array has sufficient energy. Once all conditions are
met, the PCS enters a state of Power generation, constantly detecting the power grid
for any abnormalities. If any abnormalities are detected, the PCS will trip according
to the protection settings. Additionally, when power generation is inadequate to keep
the PCS running, it will switch to standby mode. Upon detecting a stable and higher
voltage in the Battery array, the PCS will attempt to start Power generation again.
To Next Page