9.3 Y-Comb Terminal Block (Optional)
The Y-Comb is intended for use in the SCA36/50/60KTL-DO/US-480
inverters. This accessory is applied between two adjacent fuseholders
within the inverter wire-box and distributes current between the two
fuseholders. When products such as Y-branch connectors are used in the
array field to combine the output of two strings the current is as much as 30
or 40A. In order to distribute current and provide optimal thermal results the
Y-Comb is required.
Optional Y-Comb
Terninal
20A fuse 2 pcs
(Standard wire-box)
Figure 9-6 Y-Comb Terminal Block
To Next Page
Loading...
