Figure 5-3 Set up Grid Standard
6. Setting the Time. From the previous menu, press ESC to return to the
System Parameters menu. Select Time and press ENT. Scroll up/down
to select the numerical value, then press ENT to go to next option. e.g.:
Year to Month, press ESC to go to last option. e.g.: Month to Year.
Finally Press the ENT key to confirm the setting. (Press more
than 1 second to go to last position of the number when setting the
parameters. e.g: 2008 to 2008. Press more than 1 second to go
to the next position of the number when setting the parameters. e.g:
2008 to 2008.)
Figure 5-4 Time Setting
To Next Page
Loading...
