EasyManua.ls Logo

Cramaro CABRIOLE - Combined with Tensioner Quick Release; Types of Sheet Available

Default Icon
78 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CABRIOLE’
CRAMARO TS S.r.l. 37044 COLOGNA V.TA (VR) - VIA QUARI DESTRA, 71/G TEL. +39 0442/411688 / FAX + 39 0442/411690
E-MAIL info@cramaro.com WEBSITE: http://www.cramaro.com - Manual n° MCA016-EN-ED00 date 15/01/15
page 18
FIG 12
FIG 13
-A-
FIG 14
COMBINED with TENSIONER QUICK RELEASE the ropes are tensioned by the movement of the two pulleys that
are integrated into the REMOVABLE unit, which also works as a QUICK RELEASE and TENSIONER at the same
time, to free the side door from the ropes when loading and unloading with the side door open
NOTE:
For both of these applications, the system is
available both for the RIGHT SIDE of the
container and for the LEFT SIDE
IT MUST NOT BE USED
SIMULTANEOUSLY ON BOTH SIDES
OF THE CONTAINER, OTHERWISE THE
BOWS NO LONGER HAVE ADEQUATE
SUPPORT
- TYPES OF SHEET AVAILABLE -
The CABRIOLE’ tarpaulin is standard designed with THREE types of sheets that are available to satisfy the most
varied transport needs.
SHEET TYPE - A - : is the so-called BASIC sheet
it is the most commonly used and is suited for vehicles that
transport materials that have no problem
withstanding minor water leaks
The sheet hangs over the side of the container by a few
centimetres, but does not extend laterally.
This type of sheet can be paired with all the
tarpaulin side quick fit systems
and can also be made in the
POLYURETHANE version for heavy use in
transporting hot materials.
SHEET TYPE - B - : is the so-called HERMETIC sheet
because it extends down the sides of the container
by about 25 cm.
It is suitable to transport materials that are sensitive to water
and this type of sheet can be paired only with the rope and
elastic tarpaulin side hooking system. It can also be
made in the
POLYURETHANE version for heavy use
in transporting hot materials

Table of Contents