CABRIOLE’
CRAMARO TS S.r.l. – 37044 COLOGNA V.TA (VR) - VIA QUARI DESTRA, 71/G TEL. +39 0442/411688 / FAX + 39 0442/411690
E-MAIL info@cramaro.com WEBSITE: http://www.cramaro.com - Manual n° MCA016-EN-ED00 – date 15/01/15
page 48
• After having fully extended the tarpaulin, secure the cord, threading it through the
thimbles with the supplied clamp (see figure).
The cord must be slightly less tensioned compared to the sheet tensioning, making
sure that the thimble does not turn under the bracket.
-
ASSEMBLING SHEET LOCKING SIDE HOOKS -
As previously mentioned, the CABRIOLE’ tarpaulin is supplied already pre-assembled in the factory; as such, it
already has all the accessories ordered by the final user incorporated.
Therefore, the tarpaulin normally has the entire series of AUTOMATIC anchoring HOOKS already assembled in
the necessary positions and quantities, which ensure the tarpaulin works perfectly in all conditions of use
Once the tarpaulin has been extended and secured in the front, you must position and secure the various anchoring
systems provided for the supplied tarpaulin hooks along the sides of the container.
There can be different types of quick fit hooks and the assembly of each one requires some minor precautions to
guarantee their proper, constant good operation.
To Next Page
Loading...