Cramaro CABRIOLE - VERTICAL ROLLER Hooks; Sheet and Anchoring Hook Coupling

CABRIOLE’
CRAMARO TS S.r.l. – 37044 COLOGNA V.TA (VR) - VIA QUARI DESTRA, 71/G TEL. +39 0442/411688 / FAX + 39 0442/411690
E-MAIL info@cramaro.com WEBSITE: http://www.cramaro.com - Manual n° MCA016-EN-ED00 – date 15/01/15
page 21
FIG 22
FIG 23
FIG 21 / pers
CUSTOMISATION
IN-GROOVE HORIZONTAL WHEEL quick fit hooks
in some applications where the customer creates a customised order,
the hooks slide in a groove on the side of the upper
side profile of the container
VERTICAL ROLLER quick fit hooks
These are hooks supplied in a series of multiple parts.
Based on the length of the container, with equal lengths,
they are equipped with specific CONTINUOUS anchoring profiles
to secure on the sides of the container where the hook
is always anchored, both with the tarpaulin extended (covered container)
and with the tarpaulin retracted (uncovered container)
this type of hook is mainly used
in particularly windy areas as the hook is always
anchored to the side profile.
- SHEET AND ANCHORING HOOK COUPLING -
SHEET - TYPE A -
For sheet type – A–, there is the possibility of
using the entire series of
AUTOMATIC activation HOOKS
Furthermore, a series of additional anchors is
supplied with the tarpaulin that guarantee
complete safety even in prohibitive usage
conditions
F = safety rope