CABRIOLE’
CRAMARO TS S.r.l. – 37044 COLOGNA V.TA (VR) - VIA QUARI DESTRA, 71/G TEL. +39 0442/411688 / FAX + 39 0442/411690
E-MAIL info@cramaro.com WEBSITE: http://www.cramaro.com - Manual n° MCA016-EN-ED00 – date 15/01/15
page 7
i The replacement of components called “spare parts” is not considered a modification.
• Land where there might be unexploded war equipment.
• Closed or semi-closed environments where the dust of materials moved may be harmful to
health.
• Environments where a fire hazard exists.
• Environments with vapours deriving from chemical processes.
• Areas adjacent to nuclear plants.
• Environments with the characteristics of an “Explosive atmosphere” (explosion hazard)
• With poor visibility.
• In environments with dangerous animals (not pets).
• Noise levels that reduce concentration and cause stress.
• In environments with a considerable amount of exhaust gases from other machines.
• In environments where there is an uprising or war.
In the event of long periods of inactivity, the machine must be “stored” in a covered area not accessible to
people not authorised to use it.
CRAMARO TS s.r.l. builds machines designed to "last over time", but their "lifetime" is subject to the storage
and maintenance carried out by the owner.
ENVIRONMENT!
To protect the environment, please follow the instructions below.
At the end of the machine's life cycle, dismantle it and separate the materials based on their nature. Materials
can be grouped by:
- construction steel; plastic material,
- lubricant oil; lubricant grease; rubber and rubber by-products; paint; etc.
All the components listed above must be sent to bodies that are expressly authorised
to dispose of or recycle them (metal materials can be disposed of as scrap).
Areas where the machine cannot be used
Storage of the machine.
''Lifetime'' of the machine
Demolition of the machine
To Next Page
Loading...