100
SCREWS
ITEM PART NUMBER PART NAME AND DESCRIPTION
A1 80030446 Screw, Phil Pan Head 1/4 - 20 x 1 ¼"
A2 80030422 Screw, Phil Pan #8 - 32 x 3/8"
A3 80030418 Screw, Phil Pan w/out washer self drilling, #8 - 18 x 1/2"
A4 80030434 Screw, Phil Pan Swage Form #8 - 32 x 1/4"
A5 80030499 Screw, Phil Pan #2-32 x 3/8"
A6 80030501 Screw, Phil Pan, #2-32 x 1/2"
A7 80030479 Screw, Phil Pan #4-24 x 1/2"
A8 80020257 Screw, Pan Head 8 - 32
A9 80020284 Screw, Hex Head ¼-28 X .5
A10 80030494 Screw, Phil Pan #8 - 32 x 5/8"
A11 80030428 Screw, Phil Pan Form #10 - 32 x 1 1/4"
A12 80020255 Screw, Fl Flstr Shoulder #10 - 32 x 1/4"
A13 80030423 Screw, Phil Pan Sems with washer, #8 - 18 x 1/2"
A14 80030436 Screw, Self Tapping, 1/4 - 20 x 5/8"
A15 80030468 Screw, Hex Washer 8x5/8”
A16 80020265 Screw, Phil Truss #10 - 32 x 3/8"
A17 80030503 Screw, Phil Pan with lock washer #4 - 40 x 3/8"
A18 80020236 Screw, Shoulder #4-40
A19 80030431 Screw, Phil Pan #8-18x1/2"
A20 80030454 Screw, Hex Head 10-16x .50
A21 80030449 Screw, Hex Tapping .250-20
A22 80030452 Screw, Hex Washer Head ¼-20
A23 80030497 Screw, Phil Pan #8-18x.375"
A24 80030502 Screw, Phil Pan #8-18x5/8”
A25 80030417 Screw, 4-24 HiLo
A26 80030421 Screw, Phil Pan Swage Form #8-32x1/2"
A27 80030451 Screw, Hex Washer Head #8-18x1/2"
A28 80020248 Screw, Pan Head #6-32 X ¼
A29 80030415 Screw, Nylock #8-32x1/2"
A30 80030529 Screw, Wing ¼ - 20 x 1 ¼ molded nylon (for shipping bracket)
A31 CR0002205 Screw, Nylon (Circuit Board Support – Display)
A32 80030541 Screw, TEK Zinc #20 X .750
A33 AP13100035 Screw, Fl. Torx Tap ¼-20 X ½
A34 80030488 Screw, Hex w/ washer 8-32 x 3/8
A35 80030433 Screw, Phillips Flat 10-32 X .5
A36 80050387 Screw, Shoulder ¼-20 X .35
A37 80030540 Screw, Machine w/ lock 10-24 X 3/8
A38 1572269 Screw, Hex w/ Head, Hi-Lo #6 X ½
A39 80020250 Screw, Hex Button Head 10-32 X 5/8
A40 80020285 Screw, 10-32 X 1.375
A41
A42
A43
A44
A45
A46
Part numbers & descriptions are subject to change with out notice.
NA = Not applicable TBD = To be determined RB = Replaced by
To Next Page
Loading...
