Crane BevMax 4 - Setup Mode 3; Satellite (137; 937 Satellite) Mode

14
BevMax 4 5800-4/3800-4 Board Programming
SETUP MODE 3 Satellite Mode (137/937)
A Step through below A Step through below
B EXE OR MDB B (Not Used)
C Set Pricing Mode C Set SAT Price (Satellite only)
D Assign Priceline D Enable Combo Discount
E View PL Assignments E Number Combo Discount
F View PL Value F (not used)
1 Quick Payback 1 Set Golden Eye Policy
2 2 Set Golden Eye Selections
3 3 Check Motor Scan (press #1)
4 4 Set Credit Return Timeout
5
6 Use other Setup Modes for:
7 Multivend: Setup Mode 2 key 1.
8 Set Not Available: Test Mode key
3.
9 Set Not Available Time: Setup
Mode 1 key 3.
0 Test Vend: Test Mode key 9
*Factory Diagnostics – sub-menus
A Build #### = software revision build number
B Model # = Set Model Number DN5800-4, DN3800-4, DN5800-E4, DN3800-E4
E Extended Cup = All BevMax 4 5800-4 - Enabled
F Delivery (Picker) Cup Sensor Option = BevMax 4 5800-4 with cup sensor set ON, BevMax 4 5800-4 with out cup sensor set OFF.
1 Position Test = F – goes home; 0 – cycles plunger; * - stops all motors; Shelf letter – moves cup to shelf selected; Column # - moves cup to column selected.
2 Port Test = A – opens port; B – closes port; C – sensor test ON’; D – sensor test OFF; E – cup LED’s on; F – port LED’s on; * - All Stop.
3 Delivery (Picker) Cup Check = “On (status of cup sensor):#”; “In (detects product in cup):#”; “Out (picker out switch status):#”; “Hm (picker home switch status):#”.
4
Repeat Vend
5 Vend Error Codes = Factory Use Only / Do Not Use.
6 Product Sensors = All BevMax 4 5800-4 set ON
7 Factory Use Only / Do Not Use
8 Shelf Offset = BevMax 4 5800-4 Shelf Location “D2” = 700
9 (Not Used)
0 Hook Swipe X = sets far right travel distance to Delivery door (BevMax 4 5800-4 factory default = 93871).
**Test Vend = Test Mode press “9” and “*” (enter) to get to “Enter Selection”. Close the service door and choose desired selection to test vend.
To set Timers for schools = Set Date/Time / Set Not Available blocks / Set Not Available Times / Set Daylight Savings Time
Cash and Sales Numbers = Sales / Number Sold / Sales by Column / Total Sales / Cash Box
***Set Shelf Location = Service Mode press “8” - BevMax 4 5800-4 = D2 – Domestic, E3 - Export 5 Shelf, E4 – Export 4 Shelf (default is 700)
Set Hook Swipe X = Test Mode press “F” and “*” (enter) to get to “Factory Diagnostics”. Press “8” and “*” (enter) to get to Hook Swipe ##### (default is 91871).