84
GATE TRAY DETAIL
ITEM PART DESCRIPTION
DN5800-4
DN5800-E4
DN3800-4
DN3800-E4
1 Tray Assy., 9 Column 65700510 NA
Tray Assy., 7 Column NA CR0013718
2 Chassis Tray, Tall Gate was 647,070,89x.x3, 647,071,50x.x3 CR0004077 NA
Chassis Tray, Tall Gate NA CR0004139
3 Double Gate Assembly Kit (gate & 2 screws) was 64701110 65701260 Same
Double Gate Assembly was 80182018 80182441 Same
4 Double Gate Assembly Right Kit (gate & 2 screws) was 64701120 65701240 Same
Double Gate Assembly Right was 80182029 80182443 Same
5 Double Gate Assembly Left Kit (gate & 2 screws) was 64701130 65701250 Same
Double Gate Assembly Left was 80182031 80182442 Same
6 Spring Gear Box Part of #7 Same
7 Gear Box Assembly, 3 column 80182062 Same
Gear Box Assy., 2 column NA 80182196
8 Double Gate Drive Mech Target Part of #7 Same
9 Double Gate Drive Mech Gear Part of #7 Same
10 Double Gate Drive Mech Follower Part of #7 Same
11 Tray Wire, Formed Domestic 9 Column (Wide) 80140293 NA
Tray Wire, Formed Domestic 7 Column (Narrow) NA CR0000878
12 Slide with Product Pusher Assembly was 80182096 80182492 Same
13 Product Pusher Spring 80170113 Same
14A Screw, Hex Head Hi Lo #6 X ½ (5/30/08 & higher) 1572269 Same
14B Screw, Hex Washer #4-24 X ¾ (prior to 5/30/08) 80130417 Same
15 1/8” Socket, ¼” Drive 80010194 Same
3/16” Socket, ¼” Drive 80010252 Same
16 Stabilizer, Tray Slide (8881-0049AH & higher) 80190501 Same
Stabilizer, Tray Slide (prior to 8881-0049AH) 80190467 Same
Part numbers & descriptions are subject to change with out notice.
NA = Not applicable TBD = To be determined RB = Replaced by
To Next Page
Loading...
