Crane BevMAX Refresh 6 Media - TROUBLESHOOTING FLOW CHARTS; ALL COINS ARE REJECTED

Page 43 of 57
TROUBLESHOOTING FLOW CHARTS
These charts are intended as a guide to help isolate and correct problems you may encounter. Should your
Machine show ‘OUT OF SERVICE”, check Active Errors in Diagnostics when first entering programming with
3333.
ALL COINS ARE REJECTED
Dirty / faulty
Coin Sensor.
Incompatible
Coin Mech.
Defective Coin
Mech.
Apply power.
Check for cause, correct,
reset Outlet Breaker.
All Coins are
rejected.
Main Power
OFF /
Disconnected.
Outlet Breaker
tripped.
Clear Coins.
Replace spring.
Weak spring
on Mech Gate.
Clean & reset Gate.
Clean / replace.
Gate partially
open.
Jammed Coin
Mechanism.
Replace Coin Mech.
Replace Coin Mech.
Check MDB Harness
& connections.
MDB Harness.
Defective
Media Atlas H
Board.
Replace Media Atlas H
Board.