Page 6 of 57
GENERAL INFORMATION
VENDER SAFETY PRECAUTIONS
Please read this manual in its entirety. This service information is intended for use by a qualified service technician
who is familiar with proper and safe procedures to be followed when repairing, replacing or adjusting any Crane
Merchandising Systems vendor components. All repairs should be performed by a qualified service technician
who is equipped with the proper tools and replacement components, using genuine Crane Merchandising Systems
factory parts. This Vendor should only be used by those individuals that have a clear understanding of how to
operate a vending machine in a safe manner.
REPAIRS AND/OR SERVICING ATTEMPTED BY UNQUALIFIED PERSONS CAN RESULT IN
HAZARDS DEVELOPING DUE TO IMPROPER ASSEMBLY OR ADJUSTMENTS WHILE
PERFORMING SUCH REPAIRS. PERSONS NOT HAVING A PROPER BACKGROUND MAY
SUBJECT THEMSELVES TO THE RISK OF INJURY OR ELECTRICAL SHOCK WHICH CAN BE
SERIOUS OR EVEN FATAL.
PRODUCT IDENTIFICATION
First production of BevMAX Refresh Media 5800-6/3800-6 Domestic and BevMAX Refresh Media 5800-E6/3800-
E6 Export Venders with new electronics platform was May 2020. The production date of Crane Merchandising
Systems products is now determined by the date code incorporated in the serial number.
The Machine serial number incorporates the build date, in the format:
11yymmddxxxx
11 indicates the BevMAX model, yymmdd is the year, month, & date of production, and xxxx is a sequential build
number.
Servicing shall be done by factory authorized service personnel who have
been properly trained so as to minimize the risk of possible ignition due to
incorrect parts or improper service, including the use of proper parts.
To Next Page
Loading...
