Crane BevMAX Refresh 6 Media - BILL REJECTION AND VALIDATOR FLOW CHARTS; ALL BILLS ARE REJECTED

Page 44 of 57
ALL BILLS ARE REJECTED
Apply power.
Check for cause, correct,
reset Outlet Breaker.
.
List Errors to determine cause. Refer to
Programming for Error explanations.
All Bills are
rejected.
Main Power
OFF/Disconnected.
Outlet Breaker
tripped.
Check MDB Harness & connections.
Machine Out
of Service.
Fill Coin Tubes.
Clear / clean path.
MDB Harness.
Reset Switches.
Replace Validator.
Replace Validator.
Defective Atlas H
Board.
Replace Atlas H
Board.
Defective
Validator.
Incompatible
Validator.
Wrong Option
Switch settings.
Coin Mech low
on Coins.
Bill path
obstructed/dirty
.