Crestron DGE-100 - Diagnostics

48 • DGE-100 and DM-DGE-200-C Product Manual — Doc. 7696D
l
Tap On or Off next to Enabled to turn the digital clock screensaver on or off during
standby timeout.
l
Tap On or Off next to 24 Hour to turn 24-hour time format on or off for the digital clock.
l
Tap the up and down arrow buttons under Screen Saver Brightness to set the screensaver
brightness from 0to100%.
Tap the back button to return to the Standby Timeout screen.
Tap the back button again to return to the main setup screen.
Diagnostics
Tap Diagnostics on the main setup screen to display the Diagnostics screen.
Use the Diagnostics screen to access various diagnostic test screens for the DGE. The
Diagnostics screen also provides the DGE CPU temperature and available memory.
Each test screen is described in the sections that follow.
Tap the back button to return to the main setup screen.