Crestron DGE-100 - Configure a Static IP Address

38 • DGE-100 and DM-DGE-200-C Product Manual — Doc. 7696D
6. Enter the admin account username and password created in step 4, and then select Sign
In. The web configuration interface is displayed upon successful authentication.
Once an admin user has been created, additional users and groups with varying access levels can
be added to the DGE. For more information, refer to Authentication Management on page 75.
Configure a Static IPAddress
The DGE ships with DHCP turned on by default.
To set a static IPaddress for the DGE:
1. Access the web configuration interface as described in Access the Web Configuration
Interface on page 35.
2. Navigate to NETWORK>Network Setting.