Product Manual — Doc. 7696D DGE-100 and DM-DGE-200-C • 39
3. Turn off the DHCPtoggle.
4. Enter the static IPinformation in the appropriate text fields. For more information, refer
to Network Setting on page 66.
5. Select Save Changes on the top right of the accordion.
NOTE:Astatic IPaddress can also be set using the Ethernet Setup on page 41 local setup
screen.
Set the Time Zone
The time zone must be set on the DGE if it will not be paired with a control system IP table.
To set the time zone:
1. Access the web configuration interface as described in Access the Web Configuration
Interface on page 35.
2. Navigate to DEVICE>Configure Date/Time.
3. Select the time zone where the DGE will be used from the Time Zone drop-down menu.
4. Select Save Changes on the top right of the accordion.
To Next Page
Loading...
Need help?
General