Crestron DGE-100 - Page 70

66 • DGE-100 and DM-DGE-200-C Product Manual — Doc. 7696D
Network Setting
Expand the Network Setting accordion to configure general network settings for the DGE.
NOTE:The IP Address, Subnet Mask, and Default Gateway fields are required only if DHCP is
turned off.
l
Host Name:Enter the DGEhost name.
l
Domain Name:Enter the fullyqualified domain name on the network.
l
SSH:Turn on the toggle to use SSH(secure socket shell)for secure remote access.
l
Primary Static DNS:Enter the primary DNS address used to resolve the DGEdomain to
an IPaddress.
l
Secondary Static DNS:Enter the secondary DNS address used to resolve the DGEdomain
to an IPaddress.
l
DHCP:Turn on the toggle to turn on DHCPfor the DGE Ethernet connection.
NOTE:If DHCP is turned on, IP does not function until a reply has been received from
the server. The DGE broadcasts requests for an IP address periodically.
l
IPAddress:Enter the static DGEIPaddress on the network.
l
Subnet Mask:Enter the DGEsubnet mask address on the network.
l
Default Gateway:Enter the gateway router address on the network.
Select Save Changes next to the Network Setting accordion to save any changes. Select Revert
to revert to the last saved settings.