Crestron Mercury CCS-UC-1 - Page 46

42 • CCS-UC-1: Crestron Mercury Tabletop Conference System Product Manual – DOC. 7844M
 DN: Enter the path in the directory information tree to start the search.
For example, dc=Mycompany,dc=MyCompany,dc=com.
 Search: Enter the LDAP search string to use. Add search filters as
necessary to narrow the search.
Sample: (&(
XX=%QUERY%)(objectCategory=person)(objectClass=user))
Where
XX is the name of the Display Attribute, and the subsequent terms
are search filters.
%QUERY% will be replaced with the search string.
NOTE: Must contain “%QUERY%” and must start with “(” and end with
“)”.
 Display Attribute: Enter the name of the LDAP field associated with the
attribute used for displaying a user name.
 Location (optional): Enter the name of the LDAP field associated with the
attribute used for listing a location.
 Department Attribute (optional): Enter the name of the LDAP field
associated with the attribute used for listing a department.
 Phone Attribute: Enter the name of the LDAP field associated with the
attribute used for listing a phone number.
− Kerberos Server
 Username: Enter the user name for logging the device into the LDAP
server.
 Password: Enter the password associated with the Username.
 LDAP Domain: Enter the fully qualified domain associated with the login
credentials supplied in the
Username and Password fields. For example,
MyCompany.MyCompany.com.
 Host: Enter the fully qualified host name or the IP address of the LDAP
server.
 Port: Enter the port number used by the LDAP server to listen for LDAP
queries. The default value is 389.
 DN: Enter the path in the Directory Information Tree to start the search.
for example dc=Mycompany,dc=MyCompany,dc=com.