Product Manual – DOC. 7844M CCS-UC-1: Crestron Mercury Tabletop Conference System • 9
NETWORK
Click NETWORK to configure the device for operating in a network environment. The
screen displays controls for configuring the network settings, network proxy settings,
and 802.1x authentication.
Network Setting
To configure the network settings follow this procedure:
NETWORK Screen - Network Setting
1. Enter a host name in the Host Name field and a domain name (optional) in the
Domain Name field.
NOTE: Use a host name and domain name as an alternative to IP addressing
when connecting client computers to the device.
To Next Page
Loading...
