Product Manual – DOC. 7844M CCS-UC-1: Crestron Mercury Tabletop Conference System • 81
During a call, a user has the ability to navigate to other screens (for example Present).
While using another function, the edge of the screen will change to green. Tap the green
edge to quickly navigate back to the call controls.
Return to Call Control
Make a Call with an Office Session Initiation Protocol (SIP) System
When configured, the CCS-UC-1 can make phone calls using an office’s SIP system. For
information on compatible SIP systems, visit www.crestron.com/mercury
.
To make a call with the office SIP system, follow this procedure:
1. Tap . The dialing screen is displayed.
Dialing Screen
2. Calls can be dialed from the speed dial listings, the numeric keypad, or searching
an address book. Choose one of the following options to make a call:
− Speed Dial: Tap a speed dial button to call. The device calls the number
stored for the speed dial button.
To Next Page
Loading...
