Crestron Mercury CCS-UC-1 User Manual

Product Manual – DOC. 7844M CCS-UC-1: Crestron Mercury Tabletop Conference System • 71
Present via HDMI
To present to a room using a wired HDMI connection:
1. Tap . The Connect Your Device screen is displayed.
Connect Your Device Screen
2. Connect the presentation source to the HDMI cable that is connected to the
CCS-UC-1.
3. When done presenting, tap Stop. To return to the previous screen, tap
< Presentation Types.
Present Crestron AirBoard Content
Tap to display, record, and share content from a paired Crestron AirBoard device.
The view from the Crestron AirBoard device is displayed on the connected display and
controls are shown on the CCS-UC-1.
NOTE: A Crestron AirBoard recording session begins immediately after tapping .
Tapping stops the presentation on the connected display device, but does not stop
the recording session.

Crestron Mercury CCS-UC-1 Specifications

General

Brand	Crestron
Model	Mercury CCS-UC-1
Category	Conference System
Language	English