CRG LF100 - Page 15

9
A=2, reset the receipt serial no. after clear the
cashier report.
A=4, reset the receipt serial no. after clear the
e-journal information.
D=1, the machine will ask if sure to clear the
report after print the single report on Z.
D=0, the machine will clear the report automatic
after printed the single report on Z.
D=2, the machine will show and print the gross
profit when take X mode report.
D=0, the machine will print “***” instead of “gross
profit”.
18. Receipt
Font
ABCD
A- PLU name line.
B- Sub-total line.
C- commodity line.
D- receipt no., and date line.
1 =double height, 2=double width, 3=double H&W
19. Printing
Content
ABCD
A=1, print the PLU code on receipt.
A=0, print the serial no. on receipt.
A=2, do not print the serial no. on receipt.
A=0, the PLU name is in one line.(the name and
the qty, price, amount is not in the same
line.)
A=4, the PLU name, qty, price, and amount are in
the same line.
B=0, in R mode, print all PLUs when selling.
B=1, in R mode, print the sale receipt when do the
settlement.
B=2, the receipt will print the total qty.
B=4, recall the temporary receipts, but do not print
the detail info of the table. If need to print the
detail, please input the table no., pres【Shift】-
【Table】
B=5, recall the temporary receipts, but do not print
the detail info of the table. If need to print the
detail, please setup the program key【Suspense
account】.
C=1, combine the same PLU.
C=2, print the “cancel” item after the whole sale.
(B=1)
C=4, means just print the current receipt head infor.
Note: The default value of No.19 is 0040, which
means just print the current receipt head. If need to