4-10 Control Functions
“4WD/ LOCK”switch
1. “4WD/ “LOCK” button
2. “2WD”/’4WD” lever switch
CAUTION:
When ATV is in operation, DO NOT press the
2WD/4WD buttons. This may break the rear
axle gears.
Two-wheel drive (”2WD”): Power is sup-
plied to the rear wheels only.
Four-wheel drive (“4WD’): Power is
supplied to the rear and front wheels.
Four–wheel drive with the differential gear
locked (“4WD-LOCK”): Power is supplied
to the rear and front wheels when the
differential gear is locked. Unlike the 4WD
mode, all wheels turn at the same speed
regardless of traction.
WARNING
POTENTIAL HAZARD
Changing from 2WD to 4WD or from 4WD to
4WD LOCK, while the ATV is moving.
WHAT CAN HAPPEN
It may cause the ATV to become hard to
handle. The operator could lose control.
HOW TO AVOID THE HAZARD
Always completely stop the ATV before
changing from 2WD to 4WD or from 4WD to
4WD-LOCK.
To Next Page
Loading...
