Operation 6-3
from boiling. Then the fan automatically
shuts off.
Drive Select Lever Operation and
Reverse Driving
CAUTION:
Before shifting, you must stop the ATV,
release the throttle lever, otherwise the
transmission may be damaged.
Shifting:
Neutral to High and High to Low
1. Bring the ATV to a complete stop and
release the throttle lever to let the engine
idle at 1400 rpm.
2. Once the engine idle is below 1400 rpm,
apply the brakes, shift the gear in place
with the left button pressed in.
3. Apply the throttle lever gradually.
NOTE:
Make sure that the gear shift lever is
completely placed into position.
[1]．Drive Select Lever
To Next Page
Loading...
