6-4 Operation
Neutral to Reverse
NOTE:
The gear shift lever cannot be shifted
between any of the gears without first
pressing in the button on the left side of the
gear shift handle.
1. Bring the ATV to a complete stop and
release the throttle lever to let the
engine idle at 1400 rpm.
2. Once the engine idle is below 1400 rpm,
apply the brakes, shift the gear in place
with the left button pressed in.
3. Shift from neutral to reverse or
backtrack by moving the gear shift lever
into place.
[1]．Drive Select Lever
NOTE:
When in reverse, the reverse indicator on
the display panel should be on. If the light
does not come on, have a dealer inspect
the electrical circuits.
Due to the synchronizing mechanism in the
engine, the indicator may not come on until
the ATV starts moving
To Next Page
Loading...
