Page 4
INTRODUCTION
This Crow PowerWave Version V6 alarm control panel has been designed to provide the most requested features for
both the installer & the end-user. These features include ease of installation, ease of programming and user friendly
operation all in a package which is reliable, functional and attractive.
Utilising many years of experience in the security industry and implementing valuable feedback, we are proud to
provide you with a new generation of alarm control panel. The PowerWave V6 is an alarm system which brings you
the quality and features which you deserve at an affordable price. In addition to the the advanced design, only the
highest quality components have been used in the production of this PowerWave panel to ensure the highest degree
of reliability.
This manual will guide you through the installation and programming of your PowerWave alarm panel. For additional
information regarding the operation instructions and options, please refer to the enclosed “PowerWave User’s
Guide”.
PACKAGE CONTENTS
This Crow PowerWave package should contain the following items;
1 x PowerWave controller PCB
1 x PowerWave new generation backlit keypad
1 x PowerWave keypad zone list
1 x PowerWave Users Guide
1 x PowerWave Housing
1 x PowerWave mains transformer (15VA/25VA)
1 x PowerWave hardware accessory pack including:
1 x PowerWave installation & programming guide
1 x Spare 1.5A fuse
2 x Housing lid screws
10 x 2k2 (red, red, red) end of line resistors
10 x 4k7 (yellow, purple, red) end of line resistors
10 x 8k2 (grey, red, red) end of line resistors
To Next Page
Loading...
