Page 76
** Upload/Download Security Code **
P828E XXXXXXXX. Up to 8 digit security code Page 58
Dynamic Data
P830E
Misc system flags 1 = Spare 5=Spare Page 42
2 = Spare 6=Spare
3 = Spare 7=Spare
4 = Spare 8=Daylight saving active
P831E
Display keyboard address Page 42
P832E Display partitions assigned to this keypad (1=A, 2=B, 3=C) Page 42
P833E Display software version Page 42
Printing Events
P834E Start event printing Page 44
** Manually Answering an In-coming Call **
P835E
Answer incoming call (user initiated) Page 58
Walk Test Mode
P836E Toggle walk-test mode ON/OFF Page 44
Temporary Output Disable Mode
P837E
Temporary Output Disable mode - Outputs 1-8 Page 43
EE² Upload/Download
P838E Write to EE² board on serial port. Page 43
P839E Copy from EE² board on serial port to panel. Page 43
Reset to Defaults
P840E Reset user codes Page 44
P841E Reset communicator parameters Page 44
P842E
Reset radio parameters Page 44
P843E Reset PA & Voice Board Parameters Page 44
P844E Reset All other Parameters Page 44
P845E
Reset Everything back to factory Default Page 44
Clear Output Parameters
P846E Clear all output parameters (outputs 1 - 8) Page 44
Clear Memory Events
P847E
Clear the 255 event Memory Buffer Page 44
P848E Clear unreported PA events Page 44
Active Time Zones
P849E
Active Time-Zones Page 42
PA Board Output ON Message
P851E PA Board Output #1 On Message - Default 0
P852E PA Board Output #2 On Message - Default 0
P853E
PA Board Output #3 On Message - Default 0
P854E PA Board Output #4 On Message - Default 0
P855E PA Board Output #5 On Message - Default 0
P856E
PA Board Output #6 On Message - Default 0
P857E PA Board Output #7 On Message - Default 0
P858E PA Board Output #8 On Message - Default 0
PA Board Output OFF Message
P861E
PA Board Output #1 Off Message - Default 0
P862E PA Board Output #2 Off Message - Default 0
P863E PA Board Output #3 Off Message - Default 0
P864E
PA Board Output #4 Off Message - Default 0
To Next Page
Loading...
