Chapter 1 Introduction
1.7.8 FRM220-1000ES(EDS) Managed Gigabit Fiber Media Converter
The FRM220-1000EDS is a 4-port switch or dual channel (two in one) copper to fiber Gigabit Ethernet solution
designed to make conversion between 10/100/1000Base-TX and 1000Base-SX/LX with SFP transceivers. With
SNMP and Web-based management in the FRM220, the Network administrator can monitor, configure and control
the activity of each card in the chassis. This converter also supports features such as ingress/egress bandwidth
control, auto or forced mode setting for copper Ethernet as well as auto laser shutdown. The FRM220-1000E(s) is
a single copper to single fiber Gigabit Ethernet solution designed to make conversion between 10/100/1000Base-
TX and 1000Base-SX/LX with SC or SFP LC connector.
Features
• 2-port 10/100/1000Base-T to 2-port 1000Base-SX/LX (EDS)
• 1-port 10/100/1000Base-T to 1 port 1000Base-SX/LX (ES)
• Supports dual converter mode or switch mode
• Auto-negotiation or forced mode
• Auto MDI/MDIX
• Forward 2046 bytes (Max.) packets
• Support Bandwidth Control (70k ~ 250Mbps)
• Supports Flow control (Pause)
• Support Link fault pass through (LFP) function
• Supports remote CPE power fail detect (dying gasp)
• Auto Laser Shutdown (ALS)
• Online local f/w upgrade
Specifications
Ports Optical Interface
Connector : SFP LC
Data rate : 1000Mbps
Duplex mode : Full duplex
Cable type : MM 62.2/125μm, 50/125μm. SM 9/125μm
Distance : MM 2km, SM 15/30/50/80/120km, WDM 20/40/60/80km
Wavelength: 1310nm, 1550nm,
Electrical Interface
Connector : RJ45
Data rate : 10Mbps, 100Mpbs, 1000Mbps
Duplex mode: Half / Full duplex
Cable type: 10Base-T Cat.3, 4, 5, UTP, 100Base-TX Cat.5, 5e,
1000Base-T Cat. 5e or higher
Distance: 100 meters
Standards IEEE 802.3, IEEE 802.3u, IEEE802.3ab, IEEE802.3z
LEDs Power, FX-Link 1/2, 2Ch, TX-Link, TX-SPD
Power DC In 12V
Power Consumption
< 5W
Dimension (D x W x H) mm 155 x 88 x 23mm
Weight 120g
Temperature
-10~60° C (Operating) ,-20~70° C (Storage)
Humidity 10~95% non-condensing
Certification CE LVD/EMI, FCC, RoHS
MTBF
65,000 h (25° C)
This product includes the following models:
• 1000EDS (2 electrical plus 2 SFP)
• 1000ES (1 electrical plus 1 SFP)
• 1000E (1 electrical plus 1 fixed optical)
1000EDS is a manageabl
Gigabit Ethernet fiber s
placed in the FRM220-C
DIP switches if used st
utilizes SFP for 1000Base-SX/LX
fiber connection and tw
10/100/1000 Ethernet electrical
ports.
e 4 port
witch when
H20 or by
and-alone. It
o
17
To Next Page
Loading...
Need help?
General
