HYDRO. DRIVE AND BRAKE SYSTEM
45
5. Lift and safely support the tractor.
See Figure 5.48.
6. Work the belt out of the two pulleys on the belt
tensioner bracket. See Figure 5.49.
Figure 5.48
Figure 5.49
Belt
Belt route
7. Remove the single, fixed idler from the frame of
the tractor using a 1/2” wrench. See Figure 5.50.
8. Remove the belt keeper near the engine pulley
or electric PTO clutch, using a 1/2” wrench.
8a. With manual PTO, a single bolt holds the
belt keeper to the frame, to the left side of
the engine. See Figure 5.51.
Figure 5.50
Belt keeper pin
Fixed idler
Figure 5.51
Belt keeper
Bolt
Shoulder
fits through
hole in frame
To Next Page
Loading...
