Cupra ATECA - Offroad; Sport

Infotainment System
Views 1, 2, 3
Cust
omise the inf
ormation that appears in
the digital cockpit. The user chooses which
to display, and in what order, by moving a fin-
ger vertically over the dials.
Depending on the version, the Views can be
memorised by existing the menu or keeping
the View
button pressed.
Sport*
Fig. 176 SPORT menu
Fig. 177 SPORT Menu Lap timer
●
Press the infotainment button .
●
Press the VIEW function button and select
SPOR
T
.
If the corresponding equipment is available,
the following information appears in the
Sport option
›››
Fig. 176:
Instantaneous power expressed in kW
G forces
Turbo pressure, expressed in bar
(“bar”), kilopascals (“kPa”) or in pounds
per square inch (“psi”). Press the Set-
tings button to change the units of pres-
sure
›››
page 154
Coolant temperature
Oil temperature
Only 3 of these items of information can be
displayed at the same time, but the user
1.
2.
3.
4.
5.
chooses which to display, and in what order,
by moving the finger vertically over the dials.
Press the NEXT
button to bring up the L
ap
timer
menu, which is described below
›››
Fig. 177:
Analogue lap timer
New timing is started by pressing on the
surface of the digital lap timer +.
Stop lap timer/Lap time.
The analogue lap timer's time is stopped
for 5 seconds. After 5 seconds, the ana-
logue lap timer shows the real time again.
Statistics/delete last lap time.
Offroad*
Fig. 178 Offroad CAR Menu.
●
Press the infotainment button .
1
2
3
4
5
210