Transporting children safely
Vehicle i-Size positions
Front passenger seat
Rear side seat Rear central seat
airbag on airbag off
i-Size child seats X X i-U X
i-U: Position suitable for front-facing and rear-facing child restraint systems approved under ECE R129.
X: Invalid position for child restraint systems approved under ECE R129.
Securing the child seat with the “ISOFIX/i-
Size” system
You are obliged to follow the seat manufac-
turer's instructions.
●
Press the child seat onto the “ISO-
FIX/iSize” retaining rings until the child seat
is heard to engage securely
›››
Fig. 25. If the
child seat is equipped with Top Tether* an-
chor points, secure it to the correspondent
ring
›››
page 35. Observe the manufactur-
er's instructions.
●
Pull on both sides of the child seat to en-
sure that it is properly anchored.
Child seats with the “ISOFIX” and Top Teth-
er* attachment system are available from
Technical Services.
WARNING
The retaining rings are designed only for
use with “ISOFIX” and Top Tether* system
child seats.
●
Nev
er secure other child seats that do
not have the “ISOFIX” or Top Tether* sys-
tem, or retaining belts or objects to the fas-
tening rings - this can result in potentially
fatal injuries to the child.
●
Ensure that the child seat is secured cor-
rectly using the “ISOFIX” and Top Tether*
securing rings.
Top Tether* securing belts
Fig. 26
Rear seats: adjustment and assembly ac-
cording to the Top Tether belt.
»
35
To Next Page
Loading...
