EasyManua.ls Logo

Cupra ATECA - Page 73

Cupra ATECA
380 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instruments and warning/control lamps
Error: Dynamic Road Sign Display
There is a fault in the system. Have the sys-
t
em check
ed by a specialised workshop.
Speed warning currently unavailable
The speed warning function of the road
sign detection system is faulty. Have the sys-
tem checked by a specialised workshop.
Dynamic Road Sign Display: please
clean the windscreen.
The windscreen is dirty in the camera area.
Clean the windscreen.
Dynamic Road Sign Display currently
restricted.
The navigation system is not transmitting
data. Check if the navigation system has up-
dated maps.
OR: the vehicle is in a region not included
on the navigation system's map.
No data available
The traffic sign detection system does not
work in the current country.
Activate and deactivate the road sign dis-
play on the instrument panel
The permanent display of traffic signs on the
instrument panel can be activated or deacti-
vated in the infotainment system using the
button > SETTINGS > Driver assis-
tance.
Display of traffic signs
When the traffic sign detection system is
connected, a camera located on the base of
the interior rear-view mirror records the traf-
fic signs in front of the vehicle. After check-
ing and evaluating the information from the
camera, the navigation system and the cur-
rent vehicle data, up to three valid traffic
signs are displayed
Fig. 58 B in conjunc-
tion with their corresponding additional
signs.
The sign that is currently valid for the
driver is shown in the left side of the
screen For example, a maximum speed
limit of 130 km/h (100 mph)
Fig. 58 A.
A sign valid only in certain circum-
stances, e.g. 100 km/h (60 mph) is shown
second, together with the additional
rain sign.
If the windscreen wiper is
working while you are driving, the signal
with the additional rain sign will be
shown first, on the left, as it is the one
that is applicable at the time.
A sign valid only with restrictions, e.g.
No overtaking at certain times, will be
displayed third
Fig. 58 C.
Speed warning
If the system detects that the permitted
speed is exceeded, it may warn the driver
First:
Second:
Additional sign:
Third:
with a “gong” and visually with a message on
the dash panel display.
The speed warning can be adjusted or deac-
tivated completely in the infotainment sys-
tem using the button > SETTINGS >
Driver assistance
page 80. The
speed is adjusted in steps of 5 km/h (3 mph)
within a range of between 0 km/h (mph) and
20 km/h (12 mph) above the maximum
speed permitted.
Trailer mode
In vehicles equipped with a towing bracket
device from the factory and a trailer that is
electrically connected to the vehicle, it is
possible to activate or deactivate the display
of specific traffic signs for vehicles with trail-
er, such as speed limits or overtaking prohib-
itions. Activation or deactivation is per-
formed in the infotainment system using the
button > SETTINGS > Driver assis-
tance
page 80.
For trailer mode, the display of speed limits
applicable to the type of trailer or to the legal
provisions can be adjusted. The speed is ad-
justed in steps of 10 km/h (5 mph) within a
range of between 60 km/h (40 mph) and
130 km/h (80 mph). If it is adjusted to a
speed greater than that which is permitted in
the country in question for driving with a
trailer, the system automatically displays the
usual speed limits, e.g. in Germany 80 km/h
(50 mph).
»
71

Table of Contents

Related product manuals