Press the “Settings” icon,
on your iOS device.
Make sure that the “Wireless” parameter on the printer
is set to “Bluetooth” and that the “AutoReconnect”
parameter is set to “Disabled” (see paragraph 6.4).
Move the switch to ON to enable the Bluetooth
communication and start searching
for available devices .
Press the “Bluetooth” icon.
Bluetooth
Setting Bluetooth
Bluetooth
6
4
5
If parameter “Pairing” on the printer is set to
“Enabled” (see paragraph 6.4) enter the code (1234)
and press the “Pair” key to confirm.
If the parameter “Pairing” on the printer is set to
“Disabled” (see paragraph 6.4) pairing is
automatically performed.
Locate your printer (<device_BT ADDRESS>)
and select it with a click.
Setting Bluetooth
Bluetooth
<Bluetooth device>
OTHER DIVICE
<device_ BT ADDRESS>
Enter PIN
1234
1 2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
9
WXYZ
0
Cancel <device_BT ADDRESS> Pair
PIN
8
7
If the parameter “Pairing” of the printer is set to
“Enabled” (see paragraph 6.6) enter the code (1234)
If the parameter “Pairing” of the printer is set to
“Disabled” (see
paragraph 6.6) pairing is
automatically performed.
49
To Next Page
Loading...
