5.8 Wi-Fi pairing with mobile devices
K3 Wi-Fi
Check that the "Wireless" parameter is set on "Wi-Fi" and set "SSID" and “Password”
parameters (see chapter 5) to the values of the network you want to associate with.
Wireless.............................: Wi-Fi
SSID ..................................: <name>
Password...........................: <password>
Check that the same wireless parameters set on the printer are set on your mobile device
or that the devices are connected to the same network.
Wi-Fi
Wi-Fi
Turn on the device by pressing the ON/OFF key (see previous paragraphs).
ON/OFF
1
2
3
Turn on the device by pressing the ON/OFF key (see paragraph 5.4).
Check that the “Wireless” parameter is set on “Wi-Fi” and set “SSID” and “Password”
parameters (see paragraph 6.6) to the values of the network you want to associate with.
53
To Next Page
Loading...
