Platen roller
1
Disconnect the power supply cable and
open the device cover (see paragraph 5.1).
2
Clean the platen roller by using
a non-abrasive cloth moistened with isopropyl.
ATTENTION:
Do not use solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
To remove paper scraps, use tweezers or compressed air.
ON
ISOPROPYL ALCOHOL
Disconnect the power supply cable and
open the device cover (see paragraph 5.1).
Chassis
1
Disconnect the power supply cable.
To clean the device,
use compressed air or a soft cloth.
ATTENTION:
Do not use alcohol, solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
To remove paper scraps, use tweezers or compressed air.
ON
Alcohol, solvent
2
92
To Next Page
Loading...
