CYBEX Arc Trainer 772A User Manual

Install front arm handle linkage
1. Install arm handle linkage to handle.
Qty.DescriptionItem
1Screw1
1Flat washer2
1Cap3
1Spacer4
1Arm handle linkage5
1Handle6
2. Place a drop of loctite on threads of screw.
3. Place another drop of loctite into the threads of the shaft.
4. Install screw, flat washer, cap, and spacer securing the arm handle linkage using a 3/16” Allen
wrench.
NOTE: Screw must be tightened to a minimum of 90 lbs-in.
Install heart rate cable
Plug heart rate cable into connector in frame.
Qty.DescriptionItem
1Socket in frame1
1Heart rate cable2
Complete Installation
1. Operate the unit at all levels to verify proper operation.
2. Verify proper operation of contact heart rate grips.
Page 101 of 202
Cybex 772A, 772AT Arc Trainer Part Number

CYBEX Arc Trainer 772A Specifications

General

Brand	CYBEX
Model	Arc Trainer 772A
Category	Fitness Equipment
Language	English