CYBEX Arc Trainer 772A User Manual

3. Plug all cables into control board.
Qty.DescriptionItem
1Cable tie1
1Incline motor cable2
1Controller cover3
1Control board4
1Screw5
Install front access cover
Do not over tighten screws.
1. Place front access cover in place.
Qty.DescriptionItem
4Screw1
1Front access cover2
2. Install screws using a Phillips screwdriver.
Complete Installation
Operate the unit at all levels to verify proper operation.
Crank Arms
Tools Required:
• 3/16” Allen wrench
• Phillips screwdriver
• 9/16” Socket wrench
• Torque wrench, with 3/16" Allen wrench
• Loctite
®
#242
• Clean cloth (2)
Page 123 of 202
Cybex 772A, 772AT Arc Trainer Part Number

CYBEX Arc Trainer 772A Specifications

General

Brand	CYBEX
Model	Arc Trainer 772A
Category	Fitness Equipment
Language	English