Error 8: Approaching Over-Temperature
Cause:
Drive is reporting a temperature of 100+°C
Service:
• If Error 8 is alone in the log, or with other Error 8’s, then the product may be getting warm simply from
excessive high-powered use.
• Verify there are no shorts in the console cable from the LCB up to the display itself.
• Verify the brake and LCB are free from debris and accumulated dust.
• Vacuum the inside of the unit and ensure all ventilation is clear.
• Test the brake coil for potentially shorted windings.
• Replace the LCB first if the brake tests out normal and use looks normal.
• Replace the brake.
Page 48 of 202
Cybex 772A, 772AT Arc Trainer Part Number
To Next Page
Loading...
Need help?
General
