Error 17 - LCB ignored shut-down, Console pulled hardware reset
Cause:
LCB is locked up, or a loss of valid communication, or a hardware failure on the LCB. Console requested
a shut down and saw the LCB remained on battery w/o a speed signal for more than 120 seconds.
Service:
If preceded by an Error 5, this is a communications issue – check the console cable from end to end. If
not preceded by an Error 5, the LCB is likely compromised and requires replacing.
Page 63 of 202
Cybex 772A, 772AT Arc Trainer Part Number
To Next Page
Loading...
