Name: Cygnus 1
Brand: Cygnus
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Installing the Gauge

UNDERWATER CABLE CONNECTION

The Cygnus 1 ROV Underwater Gauge is provided with a fully-waterproof external cable

connection. To maintain the integrity of the electrical operation and watertight-seal it is

essential that these precautions are observed :

Ö Cable connection should only ever be made in dry ambient conditions at the surface

Connections must never be made, or broken, underwater

Ö Both the male Underwater Cable connector and the Blanking-plug should have

Molykote smeared on the pins before inserting into the Gauge

Ö The male plug-connector should be pushed fully into the female socket-connector, and

then the rubber retaining-loop should be pushed into the groove on the male-connector,

to complete the fully-waterproof connection

L A Blanking-plug is supplied for use - for safety we recommend that the Blanking Plug is

fitted at all times that there is no cable attached to the Gauge body

Questions and Answers:

Need help?

Do you have a question about the Cygnus 1 and is the answer not in the manual?

Cygnus 1 Specifications

General