Viewing Measurements on the PC
Adjusting the Comms-settings using CygLink
Ö Click on the F
ile option on the menu-bar.
Ö Move the cursor down, and click on Opt
ions…
¾ The
Options
window will open – change settings as needed :
Ö Change the
Port Number
to match the COM-port that the Gauge is to be
connected to
Ö Change the
Baud Rate
to match the rate that the Gauge is preset for
The Gauge is supplied with Baud Rate normally preset to 2400
Ö For improved contrast in the Measurement Display - if you are using a Laptop with a
ns
box
e Red indicator in the CygLink main window
will immediately change to Green
monochrome display : click on the
Greyscale
button in the
Display Optio
Ö Click OK to close the
Options
window, which will save the new settings
¾ If the Comms-settings are correct th
30
To Next Page
Loading...
