Cygnus 1 User Manual

Remote-Logging
¾ The quick-logging box appears in the CygLink main window, with the name of the
current logfile showing
¾ A numbered list of all of the Readings in the current file appears in the box. :
each Reading has a Date and Time entry, and also any comment added by the user
¾ There is a scroll-bar to allow viewing of the entire list of current readings - new
Readings are always added at the end of the list
Capture Readings to be saved :
Ö Either : Click on the Log button in the main window
Ö Or : Double-click on the current reading in the main window
Note : If the CygLink main window is in Reading-Only mode, then the double-click
method must be used.
Now save the Reading to File :
¾ A
Confirm Reading dialog box is displayed for you to confirm the Reading which will
be logged, and to add optional comment
Ö If desired : click in the Add a comment box, then type the comment
Ö Click the OK button to log the held value : the Reading is stored using the currently
selected units, along with the date and time, and any comment text
If there is not a valid current reading displayed, the last valid reading (displayed in the
Held Reading box) is logged
Ö Or : click Cancel to close the dialog box, without saving the Reading.
L Tip : to quickly log an uncommented Reading - just hit the keyboard Enter key twice :
the new Reading will be immediately added, without comment, to the end of the list
66

Cygnus 1 Specifications

General

Brand	Cygnus
Model	1
Category	Measuring Instruments
Language	English