D-Link 3100 24P - DGS Switch - Stackable - Viewing CPU Utilization

DGS-3100 Series Gigabit Stackable Managed Switch User Manual
15
0
Viewing CPU Utilization
The CPU Utilization Page contains information about the system’s CPU utilization.
1. Click Monitoring > CPU Utilization. The CPU Utilization Page opens:
Figure 6-2. CPU Utilization Page
The CPU Utilization Page contains the following fields:
Field Description
Utilization
Displays current CPU utilization by percentage.
Time Interval
Defines the 1-60 second time intervals in which the usage samples are taken as follows:
1,2,3,4,5,10,20,30,40,50,60.
Record Number
Defines the record number.
Show/Hide
Displays the CPU utilization information. The possible fields are:
Utilization checked — Utilization information is enabled. This is the default value.
Utilization unchecked — Utilization information is disabled.
2. Define the Time Interval and Record Number fields.
3. Define the Show/Hide field.
4. Click
. A sample record of CPU utilization is stored, and the device is updated.