D-Link 3100 24P - DGS Switch - Stackable - Page 62

DGS-3100 Series Gigabit Stackable Managed Switch User Manual
48
Field Description
Notify View Name
Defines a Notify view. The Notify view sends traps for the assigned SNMP view. This is
applicable for SNMPv3 only. The possible values are:
Community/View
TestReadView
PWriteView
PrivateView
Security Model
Defines the SNMP version attached to the group. The possible field values are:
SNMPv1 — Defines SNMPv1 as the security model for the group.
SNMPv2 — Defines SNMPv2 as the security model for the group.
SNMPv3 — Defines SNMPv3 as the security model for the group.
Security Level
Defines the security level attached to the group. Security levels apply to SNMPv3 only. The
possible field values are:
NoAuthNoPriv — Defines that neither the Authentication nor the Privacy security levels are
assigned to the group.
AuthNoPriv — Authenticates SNMP messages, and ensures that the SNMP message’s origin
is authenticated.
AuthPriv — Encrypts SNMP messages.
2. Define the Group Name, Read View Name, Write View Name, and Notify View Name fields.
3. Select a security model from the Security Model list.
4. Click
. The SNMP groups are defined, and the device is updated.
To delete a Group Name from the SNMP Group Table Page List:
1. Select a Gr
oup Name.
2. Click
. The Group Name is deleted, and the device is updated.