D-Link DAP-1665

6D-Link DAP-1665 User Manual
Section 1 - Product Overview
Introduction
The DAP-1665 Wireless AC1200 Dual Band Access Point gives you with the ability to transfer les with a maximum combined
wireless signal rate of up to 1200 Mbps
1
, delivering high-speed wireless network access for your home or oce.
The DAP-1665 is compliant with the latest draft IEEE 802.11ac standard, meaning that it can connect with other 802.11ac
compatible wireless client devices. It is also backward compatible with 802.11g and 802.11n devices. The AP (access point)
can be congured to operate in ve dierent modes: Access Point, Wireless Client, Repeater, Bridge, and Bridge with AP Mode.
The DAP-1665 features Wi-Fi Protected Access (WPA-PSK/WPA2-PSK), providing an enhanced level of security for wireless data
communications. The AP also supports Wi-Fi Protected Setup (WPS), using either the PIN or Push Button method, for both
Repeater and Wireless Client Mode.
1
Maximum wireless signal rate derived from draft 802.11ac specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of
network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely aect wireless signal range.
Wireless range and speed rates are D-Link RELATIVE performance measurements based on the wireless range and speed rates of a standard Wireless N product from D-Link.