31D-Link DAP-2695 User Manual
Web User Interface
Key Type:
Key Size:
Key Index (1-4):
Key:
WPA Mode:
Cipher Type:
Group Key Update Interval:
Pass Phrase:
Conrm Pass Phrase:
RADIUS Server:
Key Update Interval:
RADIUS Port:
RADIUS Secret:
Accounting Mode:
Accounting Server:
Accounting Port:
Accounting Secret:
Select HEX or ASCII.
Select 64-bit or 128-bit.
Select from the 1st to 4th key to be set as the active key.
Input up to four keys for encryption. You will select one of these keys in the Key Index drop-down menu.
When you select either WPA-Personal or WPA-Enterprise, you must also choose a WPA mode from the drop-down menu: AUTO
(WPA or WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use dierent algorithms. AUTO (WPA or WPA2) allows you to use both
WPA and WPA2. In addition, you must congure Cipher Type, and Group Key Update Interval.
Select Auto, AES, or TKIP from the drop-down menu.
Select the interval during which the group key will be valid. The default value of 1800 seconds is recommended.
When you select WPA-Personal, please enter a Pass Phrase in the corresponding eld.
When you select WPA-Personal, please re-enter the Pass Phrase entered in the previous item in the corresponding eld.
When you select WPA-Enterprise or 802.1x, enter the IP address of the RADIUS server. In addition, you must congure RADIUS
Port and RADIUS Secret.
When you select 802.1x, choose an interval (in seconds) in which the key is valid.
Enter the RADIUS port.
Enter the RADIUS secret.
Click the drop-down menu to enable or disable the accounting mode.
Enter the IP address of the accounting server.
Enter the accounting port.
Enter the accounting secret.
To Next Page
Loading...
Need help?
Operating Environment
Power
Weight and Dimensions
