D-Link DAP-2695 User Guide

79D-Link DAP-2695 User Manual
Web User Interface
Firmware and SSL Certication Upload
This page allows users to perform a rmware upgrade. A Firmware upgrade is a function that upgrades the the low-level access point software.This
is a useful feature that prevents future bugs and allows for new features to be added to this product. Please go to your local D-Link website to see
if there is a new rmware version available.
Update Firmware From
Local Hard Drive:
The current firmware version is displayed
above the le location eld. After the latest
rmware is downloaded, click Choose File
to locate the new rmware. Once the le is
selected, click Open and Upload to begin
updating the rmware. Please don’t turn the
power o while upgrading.
Language Pack
Upgrade:
After you have downloaded a language pack
to your local drive, click Choose File. Select the
language pack and click Open and Upload to
complete the upgrade.
Update SSL
Certication From
Local Hard Drive:
After you have downloaded a SSL certication
to your local drive, click Choose File. Select
the certication and click Open and Upload
to complete the upgrade.

D-Link DAP-2695 Specifications

Operating Environment

operating temperature	0˚C to 40˚C
storage temperature	-20˚C to 65˚C
operating humidity	10%~90% (non-condensing)
storage humidity	5%~95% (non-condensing)

Power

operating voltage	48V DC +/- 10% for PoE
voltage and current for PoE	48V/0.5A

Wireless Specifications

wireless frequency range	2.4 to 2.4835 GHz and 5.15 to 5.85 GHz
antenna type at 2.4GHz	3x Detachable 4 dBi Omni antennas
antenna type at 5GHz	3x Detachable 6 dBi Omni antennas

Weight and Dimensions

length	198.8 mm
width	190 mm
height	36.5 mm