D-Link DAP-2695

59D-Link DAP-2695 User Manual
Web User Interface
Filters
This page allows the user to congure Wireless MAC ACL settings for access control.
Wireless Band:
Access Control List:
SSID Index:
MAC Address:
MAC Address List:
Current Client
Information:
Specify the current wireless band rate.
Select Disable to disable the lters function.
Select Accept to accept only those devices with MAC
addresses in the Access Control List. All other devices
not on the list will be rejected.
Select Reject to reject the devices with MAC
addresses on the Access Control List. All other devices
not on the list will be accepted.
Choose from dropdown list which SSID to apply lter
list to.
Enter each MAC address that you wish to include in
your lter list, and click Apply.
When you enter a MAC address, it appears in this list.
Highlight a MAC address and click Delete to remove
it from this list.
This table displays information about all the current
connected stations.
Wireless MAC ACL