D-Link DAP-2695 User Guide

61D-Link DAP-2695 User Manual
Web User Interface
Enter the IP address or network address that will be used in the IP lter rule. For example, an IP address like 192.168.70.66 or a network address
like 192.168.70.0. This IP address or network will be inaccessible to wireless clients in this network.
IP Filter Settings
Wireless Band: Click the drop-down menu to select the
wireless band, 2.4GHz or 5GHz.
SSID Index: Click the drop-down menu to select the SSID
for the IP lter.
Filter State: Click the drop-down menu to enable or
disable the lter state. By default this feature
is disabled.
IP Address: Enter the IP address or network address.
Subnet Mask: Enter the subnet mask of the IP address or
networks address.
IP Address List: When an IP address is entered, it appears in
the list.
Highlight a IP address and click Delete icon
to remove it from the list.
Upload IP Filter File: To upload a IP lter list le, click Choose File
and navigate to the IP lter list le saved on
the computer, and then click Upload.
Download IP Filter File: To download IP Filter list le, click Download
and to save the IP lter list.

D-Link DAP-2695 Specifications

Operating Environment

operating temperature	0˚C to 40˚C
storage temperature	-20˚C to 65˚C
operating humidity	10%~90% (non-condensing)
storage humidity	5%~95% (non-condensing)

Power

operating voltage	48V DC +/- 10% for PoE
voltage and current for PoE	48V/0.5A

Wireless Specifications

wireless frequency range	2.4 to 2.4835 GHz and 5.15 to 5.85 GHz
antenna type at 2.4GHz	3x Detachable 4 dBi Omni antennas
antenna type at 5GHz	3x Detachable 6 dBi Omni antennas

Weight and Dimensions

length	198.8 mm
width	190 mm
height	36.5 mm